Skip to content
  • There are no suggestions because the search field is empty.

- How to use your VEO

How to go live on Solidsport using a VEO camera

To stream live to Solidsport with a VEO camera, charge the camera or connect it to power, connect it to Wi-Fi via the VEO app, tap Go Live, select your format and team, choose Solidsport as the platform, and enter your stream key. The stream will appear on Solidsport after approximately 75 seconds.

Step 1. Charge or power your camera

Ensure that your VEO camera is either fully charged or continuously connected to a power source. According to VEO, it takes approximately 2 hours to reach 80% battery capacity and about 4 hours for a complete charge. When fully charged, the camera can stream for around 4.5 hours on external platforms like Solidsport. Using a 20,000 mAh power bank can extend your streaming time by an additional 3 hours, for a total of approximately 7.5 hours.

Note: Charging times, battery life, and power bank compatibility may vary by camera model and firmware version. Check the latest VEO documentation for current figures.

Step 2. Connect to the VEO app and Wi-Fi

Turn on your VEO and connect to it through the VEO app. Log in to the app using your account. Once you are connected to your VEO, connect it to Wi-Fi by tapping the Settings icon in the top-right corner of the app.

Step 3. Start a live stream

Once your camera is connected to the internet, you are ready to go live. In the VEO app, tap Go Live and configure the following options:

  • Game format: 7v7 or 11v11
  • Your team
  • Platform: Solidsport
  • Your stream key

The stream will appear on Solidsport after approximately 75 seconds due to broadcast delay.

 

Step 4. Stream to Solidsport and either use our Reporter app, or the reporting in the VEO app to keep track of the score and time.

Important: You must use the Reporter app if you are streaming to a live source and want to switch between games without changing the stream key.
*Does not apply if you are using live reporting thru any of the following cupsystems: Cupmanager, Procup, Torneopal, Cupmate.

Step 5. End the stream and manage storage

After you finish your stream, follow these steps to manage storage:

  1. When prompted, select the option not to save the stream.
  2. Navigate to Library in the VEO app and delete the recordings.

When the memory card reaches full capacity, live streaming will stop. Clear the memory cards on a daily basis to ensure uninterrupted streaming. As a reference, approximately 1.5 hours of recorded footage uses around 7 GB of storage — consult current VEO documentation for the latest storage guidelines, as this may vary by resolution and camera settings.

 

Troubleshooting

  • Regularly monitor battery life to ensure it can sustain streaming throughout the day.
  • Verify your internet connection to maintain a stable stream.
  • Check the camera's storage by navigating to Settings to ensure adequate space for recording.
  • If you experience a brief loss of internet connection, stop the livestream, reboot the camera, and restart it using the same stream key as before.